What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 01.07.2025 08:55
Upvotes:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There are three different concepts here that are getting confused.
Alex Cooper Alleges She Was Sexually Harassed by College Soccer Coach - Variety
Barnstars:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The MOV will conduct when the voltage exceeds 50% of line voltage.
How does ChatGPT compare to Claude AI?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
In schematic diagrams this is the symbol for a fuse:
Final Fantasy 16 runs at 720p on Xbox Series X in performance mode - Video Games Chronicle
Now when you have a certain ac resistance, then a current flows in a loop.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
what exactly is a ‘surge’ protector?
One
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[old diagram got deleted by accident]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Dozens of Israeli children develop malignant tumors from sperm donor - The Jerusalem Post
This one hit behind the barn.
2024–10–16 [ OO OLAOYE OYEBODE ]
nine
How do you write lyrics for a song that resonates with listeners?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
eight
Edit 2024–10.
Why are Americans obese? Is it the food or is it the psychology?
This device then solves the entire problem.
It also is a device that limits the change in current flow.
a photo is worth a thousand words.
Incredible auroras delight stargazers in New Zealand photo of the day for June 2, 2025 - Space
These devices are installed between the “hot” and “neutral” and protective ground.
First Sentence:
There are two important concepts here.
What kind of lights would you like to use for your home decor?
so, what happens?
An AC voltage/ current source, and an ac inductive load.
These are simplified answers to the original question, and does not change anything I wrote above.
Scientists capture slow-motion earthquake in action - Phys.org
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
It seems Mohan does not understand the difference between a comment and an Answer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Because the load is inductive, the current lags the voltage.(by a bit).
One is “what exactly is in a ‘surge protector’ ? ”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes Rainy Season and Lightning.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is 'the assistant's answer'
2024–10–10[John johnson John Johnson ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
But… the neutral is now “floating” because of the 1 ohm resistance.
At least they know the answer if they wanted it.
The third is lightning and “how it gets conducted into a home.”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
A circuit breaker is similar, but is resettable.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
the problem then depends on "how fast does the fuse operate?".
The bolt then partially travels down the line to your home.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes the function of a fuse.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
A fuse is a non-resetable over current circuit protector.
What does a fuse do?
This is where this question deviates from being a 'generic' question, and becomes more specific.
The other is “what does a “fuse” do?”
He then asserts :
At one ohm, the resistor has a maximum of 1 watt power.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
I post the exact comment here.
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–14 [Omar Gharbi Omar Gharbi ]
This is where the MOV conducts again, and dissipated the energy.
So, the voltage could go up to 500 volts, and the fuse will not open up.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
For this case there are devices called Metal oxide varistors (MOV).
But it can get overloaded, and no longer works.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[image of Common-mode choke]
but this device (an Inductor) … impedes the rapid changes in the current.